C/ Almazara 11
Tres Cantos-Madrid(SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com
Inicio / Instrumentación / Instruments / EGT / IM-3552 /
  Síguenos en

IM-3552

Español  

4x EGT FOR ROTAX 914
57mm Diameter - ºC

  • The IM-3552 instruments have been designed especially to measure the EGT in Rotax® engines 914. 

  • The IM-3552 is available in 57 mm diameter

  • Their display areas are divided  into red, green and yellow zones in line with the ROTAX limits. 

  • Thanks to embedded operational amplifiers, this
     instrument has a high accuracy, but needs a power
     supply of 12V or 24V.

  • The instruments have been designed to work with both 12V and 24V systems. 

  • A  TFT colour screen show the engine EGT of the 4 cilinders. The screen is readable at direct sunlight.

     

 
Technical data
Case Plastic
Weight 200g
Suitable for Rotax 912 With Type "K" sender
Power Supply 10..30VDC
Power Current  0.15 Amp. Max.
Screen Full Color TFT 1.8" readable at direct sunlight.
Max. Deviation 1%
Dimensions See sketch
Calibration Calibrated by the manufacturer prior to shipment.
Wire Connections

The IM-3552 needs the IM-580 (Electronic Box)
(included). All the sensor must be connected to this box.

 

Dimensions
 
IM-3552
Part Number:IM-3552
Price = 110.00€ + VAT
We sell instruments in the whole
We sell instruments in the whole world.
To calculate the shipping expenses and VAT,
please send an email indicating your country at
roberto@aviasport.com
Soon we will answer the total quantity.
Senders
IM-927
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 2 meters.
Price : 34.40€ + VAT
IM-928
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 3 meters.
Price : 38.40€ + VAT
IM-929
Probe type "K" with Clamp. Designed for 447/503/582 Rotax engines. No need weld nut, simply drill and tighten the clamp. Stainless steel protection. Wire length 2 meters
Price : 33.20€ + VAT

AVIASPORT S.A.
C/ Almazara 11
Tres Cantos (Madrid-SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com