|
|
|
|
|
DUAL
EGT FOR ROTAX 582
52mm Diameter - ºF |
-
Can be
connected two
probes.
First shows
the temperature
of one. After of 3
seconds automatically show the other
probe temperature, The
two LEDs
are used to
show
that
probe
is reading.
-
The instruments use a pointer thats
turns 240º, witch gives them great
resolution.
-
Their display areas are divided
into red, green and yellow zones in
line with the ROTAX limits.
-
Thanks to embedded operational
amplifiers, this
instrument has a high accuracy, but
needs a power
supply of 12V or 24V.
|
 |
|
|
Case |
Plastic |
|
Weight |
200g |
|
Suitable for |
Rotax 582 With
Type "K" sender |
|
Power Supply |
10..30VDC |
|
Power Current |
0.1 Amp. Max. |
|
Scale |
500..1300 ºF |
|
Subdivision scale |
10ºF |
|
Max. Deviation |
1% |
|
Dimensions |
See sketch |
|
Calibration |
Calibrated by the
manufacturer prior to shipment. |
|
|
|
|
 |
|
|
 |
|
|
|
Senders |
|
IM-919
- Has a M8 thread and can be
installed directly on the M8
nuts that come from the factory
on 914 engines and some 912. In
the exhaust without nuts, your
need weld 4xM8 nuts. Stainless
steel protection. Wire length 2
meters. |
 |
|
IM-920
- Has a M8 thread and can be
installed directly on the M8
nuts that come from the factory
on 914 engines and some 912. In
the exhaust without nuts, your
need weld 4xM8 nuts. Stainless
steel protection. Wire length 3
meters. |
|
|
M-924
-Probe type "K" Clamp type.
Designed for 447/503/582 Rotax
engines. No need weld nut,
simply drill and tighten the
clamp. Stainless steel
protection. Wire length 2 meters. |
 |
|
|
|
|
|
|
|
|
|
|